The stainless steel storage tank is the storage container for the medium transported by the long-distance oil and gas pipeline. The oil storage tank of the oil pipeline is used to collect and store oil and maintain the stability of the oil volume of the pipeline. The oil storage tank of the terminal station is used to receive and store the incoming oil and provide it to the oil user. The gas storage tank at the gate station at the end of the gas pipeline is mainly used for peak regulation of urban gas, and is gradually being replaced by underground gas storage and pipeline gas storage.
1. The feed port, discharge port, liquid level gauge port, flange, etc. on the tank body are all integrally formed without welding, and there is no need for additional feed ports. When containing acid and alkali substances, it is necessary to configure acid and alkali resistant gaskets. When containing organic matter, configure a rubber gasket that is not easy to dissolve.
2. The product is not suitable for containing strong oxidants and good organic solvents (benzene, ethers, ketones, esters), etc.
3. The stainless steel storage tank is formed by rotomolding process.
4. The material is rolling plastic - linear polyethylene (LLDPE) or linear medium density polyethylene (LMDPE). The storage tank can hold most inorganic acids, alkalis, salts and many organic substances at room temperature.
5. Storage tanks can generally be used to contain liquids with a temperature of -40 degree to 60 degree . If the specific gravity of the liquid is heavy or the temperature is higher than 60 degree , steel-lined plastic anti-corrosion storage tanks should be used to avoid softening and deformation of the storage tanks. If the storage tank is used for chemical reaction or dilution, the corresponding test should be done in advance to determine the reaction or dilution temperature.
According to the performance of stainless steel storage tanks, it can generally be used to contain liquids with a temperature of -40 degree to 60 degree . If the specific gravity of the liquid is heavy or the temperature is higher than 60 degree , steel-lined plastic anti-corrosion storage tanks should be used to avoid softening and deformation of the storage tanks. If the storage tank is used for chemical reaction or dilution, the corresponding test should be done in advance to determine the reaction or dilution temperature.
